Product

RF-BM-S02

The module can work in bridge mode (transparent transmission mode) and direct-drive mode. After being started, the module can broadcast automatically. Smart phones with specific application running will scan and pair with it. When connection success, the smart phone can monitor and
control the module through Bluetooth protocol.
  • Describe
  • Specifications
  • Pictures
  • Download
The module can work in bridge mode (transparent transmission mode) and direct-drive mode. After being started, the module can broadcast automatically. Smart phones with specific application running will scan and pair with it. When connection success, the smart phone can monitor and control the module through Bluetooth protocol.
 
In bridge mode, user 's MCU can communicate with the mobile device in two-way through module's UART. Users can also manage and control certain communication parameters through specific UART AT commands.The detailed meaning of the user data is defined by the up-application. Mobile devices can write to the module through the APP. And the data written will be sent to the user’s MCU through UART.Then the module will transmit the data package from user MCU to the mobile devices automatically.In the development under this mode, the user need to undertake the code design for MCU code,
and the code design of APP for smart mobile terminals.
Tel:+86-755-8632 9829 Fax:+86-755-8632 9413 Email:venus@szrfstar.com Web:www.szrfstar.com/en
ShenZhen RF-star Technology Co.,Ltd.
 
In Direct-Drive mode, users take simple periphery expansion to the module. And APP drives the
module directly through BLE protocol, to implement the monitoring and control of the module by
smart mobile devices. In this mode, users only need to do the code design for smart mobile
terminals.
 
Features:
1. Easy to use, no need of any experience of Bluetooth protocol stack application
2. UART design for user interface, full-duplex bi-directional communication, and supporting the
minimum baud rate of 4800 bps;
3. Supporting bridge mode (USART transparent transmission), and direct-drive mode (no additional
MCU needed);
4. Default connection interval of 20ms, which makes quick connection;
5. Supporting software reset module by AT command, and access to the MAC address;
6. Supporting the adjustment of Bluetooth connection interval by AT command, and the control of
different forwarding rates (dynamic power adjustment);
7. Supporting the adjustment of the transmission power by AT command, the change of
broadcasting interval, the customization of broadcasting data, the customization of equipment UDID,
the setting of data delay (preparation time of user MCU USART receiving), the change of the
USART baud rate, and the change of the module names (all settings can be saved after power-off);
8. The length of the UART packets can be any below or equal to the arbitrary length of 200 byte
(large packet automatic distribution);
9. High-speed transparent transmission forward rate maximum up to 4 K/S and the stable rate to be
at 2.5 K to 2.5 K (IO5, IO6);
10. Supporting the change of module name by APP in mobile devices, the change of UART baud
rate and product UDID, the customization of broadcasting contents and cycle (all settings can be
saved after power-off);
11. Supporting the remote reset of module by APP in mobile devices, and the setting of
transmission power;
12. Supporting the adjustment of Bluetooth connection interval by APP in mobile devices but the
setting cannot be saved after power-off (dynamic power adjustment);
13. All IO port expansion,including debug ports
Tel:+86-755-8632 9829 Fax:+86-755-8632 9413 Email:venus@szrfstar.com Web:www.szrfstar.com/en
ShenZhen RF-star Technology Co.,Ltd.
88
14. Supporting the connection status and the flexible configuration of broadcasting status prompt
pin / general IO;
15. 6 two-way programmable IO port, input check triggered by external interrupt, and low power
operation (applied in trigger alarm, lighting control, remote control toys, and various i/o switch);
16. 2 programmable single timing / cycling timing output port (applied in smart timing schedule);
17. 2 ADC inputs (14 bit), EN/BAN, free configuration of sampling cycle (applied in
temperature/humidity metering, photometry, & etc.);
18. 4 programmable PWM outputs (120 hz) (applied in dimming control);
19. Module-side RSSI continuous acquisition, APP readable and auto-notifying, EN/BAN, free
setting of acquisition frequency (applied in finder, anti-loss and alarm);
20. Supporting battery reading and prompt, able to auto upload (notification of remaining battery);
21. Supporting the password setting, modifying and restoring for anti-hijacking, preventing from
malicious connection from a third party. Also the notification of independent crypto-operation result
to ease the APP programming;
22. Supporting restoring factory settings by 5-second long press and the APP remote recovery;
23. Supporting the custom of PWM output initialization status (low, full, PWM output status value
before power-off);
24. Supporting the custom of PWM frequency (61.036 Hz < = f < = 8 kHz, default 120 Hz);
25. Real-time system status prompt in broadcasting contents, including battery charge, custom
UDID, current output value of 4 PWMs or collection value of 2 ADCs , the current state of IO, and
etc.;(suitable for broadcast applications);
26. 2 level pulse-width counting, 0 ~ 0 XFFFFFFFF ms (about 49.7 days);
27. Supporting internal RTC, which can be synchronized any time from APP side;
28. Supporting 6 IO and 4 PWM timing control (default setting OFF);
29. 4 PWMs to support gradient mode (suitable for dimming control);
30. Supporting the saving of IO port configuration and output status, and the customization of the
default initialization status;
31. Supporting the shallow recovery and depth recovery modes, which can recover user data
Tel:+86-755-8632 9829 Fax:+86-755-8632 9413 Email:venus@szrfstar.com Web:www.szrfstar.com/en
ShenZhen RF-star Technology Co.,Ltd.
89
flexibly while reserve the essential configuration of the product;
32. Supporting string prompts of Bluetooth connection status from TX UART (connection, normal
disconnection and timeout disconnection) ;
33. Supporting low-level-enabled mode and pulse-width-enabled mode, and the remote shutdown;
34. Supporting auto shutdown after 30 seconds without connection in the pulse-enabled mode;
35. Supporting timeout (break) prompt by square wave alarm in the pulse-enabled mode;
36. Extremely low power in standby mode (0.4 uA of current as per TI Official for CC2540), and the
measured power consumption data as follows
 
 
*1 Note:The official test method:connect in series a 10Ω resistor in the circuit with power supply,
intercept voltage waveform with oscilloscope and perform integration
*2 Note: Multimeter test method: connect multimeter (set at uA or mA level) in series between the
battery and the module to check the value displayed, with the test voltage of 3.07 V
Above is the measured sampling data of module RF-CC2540A1 and for reference only. If lower
power consumption is expected, connection interval or broadcast cycle can be appropriately
increased, as shown in the module parameter settings and the USART AT demands in related
chapters.
 

Service


Weixin

Share

TOP