Product

RF-SM-1077B1 CC1310 Sub 1GHz 868/915MHz Module

RF-SM-1077B1 is a Sub 1GHz data module built on basis of the TI CC1310(access this link to download data sheet of the IC: http://www.ti.com/lit/ds/symlink/cc1310.pdf ) which is embedded with ARM ® Cortex ® -M3. The module comes with the transparent transmission firmware and has reserved serial ports for further development. 
  • Describe
  • Specifications
  • Pictures
  • Download
RF-SM-1077B1 CC1310 Sub 1GHz 868/915MHz Module
 
Product Description
 
RF-SM-1077B1 is a Sub 1GHz data module built on basis of the TI CC1310(access this link to download data sheet of the IC: http://www.ti.com/lit/ds/symlink/cc1310.pdf ) which is embedded with ARM ® Cortex ® -M3. The module comes with the transparent transmission firmware and has reserved serial ports for further development. 
 
Specifications

MCU TI-CC1310MCU ( ARM Cortex®-M3 + Cortex®-M0 )
System Clock is 48MHz
128KB Programmable FLASH
8KB Cache
Downloading port is JTAG
Sensor Controller 16-bit architecture
2KB SRAM(code data storage)
Size Module size is 18*26 (mm)、Chip Size\ is 7*7 (mm)
RF Rx sensitivity is -124 dBm
Output power are-10dBm、0 ~ 14dBm
Frequency band are 868MHz、915MHz、920MHz
Wireless protocol is IEEE® 802.15.4g
Low power consumption Power supply from 1.8V ~ 3.8V
Active-Mode is in 48MHz clock 2.5mA(51 μA/MHz)
Standby-Mode is 980nA
Shutdown-Mode is 79nA
Peripheral Module has 36 Pins、30 GPIOs,Chip has 48 Pins、30 GPIOs
12-bit accuracy ADC,200K sampling rate,support 8 analog channels
Support UART、SPI、I2C、I2S
AES-128 security
Tools and development enviroment Sensor Controller Studio(SC program)
SmartRF™ Studio(RF parameters setting)
SmartRF Flash Programmer 2(Firmware download)
IAR Embedded Workbench® for ARM(Development enviroment)
Code Composer Studio™(Development enviroment)

Service


Weixin

Share

TOP